High Voltage Pulse Generators, High Current / High Voltage Pulsers (DEI Division), Test & Measurement

High Voltage Pulse Generators

PTN High Current Power Supply Output currents up to 200 A

Precision high current power supplies from the BNC–Heinzinger PTN series meet the most demanding standards. Each unit is double-standardized, linear-regulated and supply a controlled DC voltage with very low ripple.

The PTN series are available in various current ratings up to a voltage class of 600 volts with power up to 5,200 Watts and meet the most demanding standards (high...

PNC High Voltage Power Supply Output Voltage up to 300,000 Volts

The PNC series are switched mode power supplies that feature precisely regulated DC voltage in combination with lowest residual ripple and best long-term stability. Units are available in various ranges up to 300,000 volts and allow for modifications in real-time to meet customer requirements. Universal housing allows for the units to be used as both a benchtop and a 19” rackmount unit.

Magnet Power Supplies

The BNC–Heinzinger Magnet Power Supplies combine a slim and cost-optimized design with high flexibility. Depending on the application, the perfect combination of current and voltage can be set by the user. Control, regulation, and current measurements can be maximized as well.

The MPS series are adapted for inductive loads and for applications where the regulation behavior is...

PVX-4000-2kV Pulsed Voltage Source

The PVX-4000-2kV is a high voltage pulse generator designed for high impedance capacitive loads and offers the choice between an internal or external power supply option. This unit offers a 0 V to ±2000 V settable output voltage and 2% to 98% duty cycles. With the internal source PVX-4000-2kV, 40 Hz to 30,000 Hz repetition rates are supported. The PVX-4000-2kV is compatible with automated...

PVX-4130 | ±6kV Pulse Output Bipolar Pulse Generator

The PVX-4130 pulse generator is optimized for high impedance capacitive loads, driving extraction grids and deflection plates, and pulsing or gating power tube grids. It generates an output voltage of 6,000 volts with rise and fall times less than 60ns, with very flat voltage pulses from 160 nanoseconds to DC into a capacitive load.

PVX-4141 | 3.5kV Pulse Output Bipolar Pulse Generator

The PVX-4141 pulse generator incorporates all control and protection logic, support power, energy storage, and output network circuitry into its chassis. Amongst the chassis features is an integrated rack mounting, brighter and more visible front panel LEDs and a modern look and feel. Amongst the module’s incorporated features include all control and protection logic, support power, energy...

PVM-4210 | ±950V Pulse Generator Module

The PVM-4210 is a compact, OEM-style pulse generator module providing two simultaneous differential voltage pulses. It is optimized for differential drive of deflection plates for electrostatic modulation of particle beams in time-of-flight mass spectrometers and accelerators.

PVM-1001 | ±950V Fast Rise-Time OEM Pulse Generator Module

The PVM-1001 adjustable pulsed voltage source can drive a 50 ohm resistive load from 0 V to 950 V in less than 10 ns (Rise Time). Pulse widths can range from 55 ns to 10 us with repetition rates to 1 MHz (bursts to 5 MHz). Typical applications include instrument calibration, component testing, beam steering, Time-of-flight mass spectrometry, and PMT and MCP gating. An external trigger source...

PVX-2506 | +50V Pulse Output Pulsed I/V Measurement Pulse Generator

The PVX-2506 pulse generator is designed using a bi-directional MOSFET output stage using DEI’s DE-Series Fast Power MOSFETs. This design allows for several benefits, including fast rise and fall times with minimal overshoot, undershoot and ringing as fast settling times. To protect the pulse generator from potential damage due to arcs and shorts in the load or interconnect cable, the PVX-2506...

EVO BNC High Voltage Power Series - Front Tilt

EVO Series | BNC High Voltage Power Supplies

Our EVO Series of high voltage power supplies provide high precision and quick control all in a user friendly operating system. The compact form factor needs only 2U, a remarkable feature considering their power density of 2kW and 3kW. A microcontroller, combined with a FPGA (Field Programmable Gate Array) permits unique precise control. FPGAs are used in high voltage power supplies because...

PVX-4110 | ±10,000V Pulse Output Bipolar Pulse Generator

The PVX-4110 pulse generator is optimized for high impedance capacitive loads and is well suited for driving extraction grids and deflection plates for electrostatic modulation of particle beams in time-of-flight mass spectrometers and accelerators, optical devices like Pockels cells and Q-switches, as well as certain low-current plasma applications. It is a direct-coupled, air-cooled solid-...

PVX-4150 | ±1.5kV Pulse Output Bipolar Pulse Output

The PVX-4150 pulse generator produces fast, high voltage waveforms to 1,500V. Optimized for high impedance capacitive loads, this module is well suited for driving extraction grids and deflection plates for electrostatic modulation of particle beams in time-of-flight mass spectrometers and accelerators.

Test and Measurement

Radiation Detection

BNC Scientific