The 7000 series is an all-in-one integrated solution that offers an indispensable set of low-noise phase measurement functions. The instrument comprises a two-channel, cross-correlation system with two internal, tunable references sources that also allows measurements with externally sourced references. We offer three platform options for the 7000 Series Phase Noise Testers: the 7070 1 MHz to 7 GHz, the 7300 1 MHz to 26 GHz, 7340 1 MHz to 40 GHz, 7350 1 MHz to 50 GHz, and the 7360 1 MHz to 65 GHz.
BNC 7000 Series SIGNAL SOURCE ANALYZER CONFIGURATOR
| Frequency Range: | 1 MHz to 7 GHz 1 MHz to 26.5 GHz 1 MHz to 40 GHz 1 MHz to 50 GHz 1 MHz to 65 GHz |
 |
| Options: | [-AM] Amplitude Noise Measurement [-LN] Ultra-low Noise Internal Reference for Improved Close-in-Phase Noise [-PULSE] Pulse RF Phase Noise Measurement [-NPS] Narrow Pulse (Low Duty Cycle) Phase Noise Measurement [-TRAN] Transient Analysis [-BURST] Burst Mode Phase Noise Measurement [-APN] Additive / Residual Phase Noise Measurement [-LO] Local Oscillator (Access to Internal References for APN) [-TSTAB] Time Stability Analysis [-VCO] VCO Characterization [-SPEC] Spectrum Monitoring [-GPIB] GPIB Communication Port [-RM] Rackmountable Chassis (* No Handle and Protective Bezel) |
|
|
Model 7340
1 MHz - 40GHz Signal Source Analyzer
|
||
Overview
Applications |
Features |
|
|
| Frequency Range |
7070: 1 MHz to 7 GHz 7350: 1 MHz to 50 GHz 7360: 1 MHz to 65 GHz |
| Input Power Range | -10 to +20 dBm |
| Analysis Range (Offset) | 0.01 Hz to 100 MHz |
| Dimensions (W x L x H) Weight |
18.4 x 13.5 x 6.1 in [467.5 x 342 x 154 mm] 22lbs [10 kg] |
| Measurements Supported | CW and Pulse Absolute Phase Noise (Standard, Ultra-Low Noise, High-Drift mode) CW and Pulse Additive Phase Noise, CW and Pulse Amplitude Noise, FFT (Fast Fourier Transform) and Transient Analyzer, Time Stabiltily and Spectrum Analysis, Frequency Counter, Allan Deviation, Jitter, Power and Phase, VCO Characterization Test Bench and Baseband Measurements. |
| OPTION CODE | MODE | DESCRIPTION | |
| GUI | ATE | ||
| AM | Y | Y | AM Noise Measurement and Analysis |
| LN | Y | Y | Ultra-Low Noise Internal OSC (improves Close-in or low offsets measurement floor) |
| PULSE | Y | N | Pulse Measurement Mode (Absolute and Additive Phase Noise) |
| NPS | Y | N | Narrow Pulse and Low Duty Cycle Measurement Mode (Absolute Phase Noise) *NEW |
| BURST | Y | N | Burst Mode Phase Noise Measurement (great for measuring very low duty RF pulse) |
| APN | Y | N | Additive (residual) Phase Noise Measurement and Analysis |
| LO | Y | N | Access to two Internal References |
| GPIB | Y | Y | GPIB interface port |
| TRAN | Y | N | Transient Measurement |
| TSTAB | Y | N | Time Stability Measurement and Analysis |
| VCO | Y | Y | Voltage Controlled Oscillator (VCO) Characterization Bench |
| SPEC | Y | N* | Spectral Monitoring |
| RM | n/a | n/a | Rackmountable Chassis (* No carrying Handle and no protective rubber bezel) |
| Model or Part Number | Description |
| P/N 7141 | Traceable AM / PM Noise Standard |
| PS06 | 1GHz to 6GHz Mechanical Phase Shifter |
| PS18 | 4GHz to 18GHz Mechanical Phase Shifter |
| P/N 7128 | Pre-configured Windows-based Laptop with BNC Model 7000 Series GUI |
| P/N 7135 | Spare Power Supply |
A remote control for the instrument is available with LAN (VXI-11), USB or GPIB. The GPIB is an option and conforms with IEEE standards. The remote control is addressed with a user choice of software or command string options. The included comprehensive GUI gives users control of all parameters in BNC's familiar virtual instrument panel.
Click Image to Enlarge
Downloadable resources such as datasheets, firmware, software, drivers and products manuals. Alternatively, you can browse resources directly by visiting our downloads page.
• Product Datasheets
• Product Firmware
• Product Software and Drivers
• Product Manuals
Media
Price List
Price lists are available to our registered users. To view pricing for this and other products, please log in or create a free account.