BNC Scientific

The GFT614 module is specially designed for distribution of high frequency clock and high-speed logic signal to multiple devices via long cable. All outputs with 50 Ω load can drive 100 feet of cable at clock rate greater than 200 MHz with 2.5 V amplitude.

The channel input threshold can be set to +1 or 0 or -1 V and the input load can be selected from 50 Ω or 1 KΩ...

The TOPAZ-SiPM is a compact, stand-alone digital Multi-Channel Analyzer (MCA) capable of performing Pulse Height Analysis (PHA) of the signal produced by scintillation detectors which incorporate Silicon devices as photomultipliers (acronymized to SiPMs). Silicon Photomultipliers can be found paired to scintillators employing standard crystals such as NaI(Tl), CsI(Tl), BGO, LaBr3 (Ce), LaCl3(...

This microprocessor-controlled instrument represents the new gold standard of survey instruments. The DSM-500 boasts an oversized digital display and a unique capability for dual probe capability. Comes standard with timed-count capability, probe-saturation and error indicators.

The new bGamma software package is a general purpose, comprehensive, and extensive software package for gamma-ray spectroscopy analysis, and radionuclide identification and quantification. bGamma is designed to run seamlessly in Windows, Linux and Mac iOS systems. The sophisticated software can be used with standard medium and high-resolution scintillators (NaI, CeBr3, LaBr3, etc.) and High...

Three pancake GM detecotrs configured in a sturdy angled foot rest to make it easy to scan shoes and boots for contamination. Includes a mounted spindle on which to place "cling" wrap to cover the detector area and prevent dirt and contamination from falling onto the detectors. Works with any Johnson meter, but especially designed for the RML-200 Lab Counter-top Alarming Ratemeter.

The DSM-503 Survey meter is the perfect mix of rugged and dependable for use in a variety of environments. With it's internal detector, this instrument is designed to fit the perfect application for general users of radiation measurement and monitoring. The internal energy compensated gm detector makes this instrument a perfect fit for general users of radiological instruments.

The DSM-525 is the most functional survey instrument on the market with its dual probe capability. This dual connection capability allows users the luxury of multiple level measurements with as many as four different probes calibrated to each measurement type. No more retracking to the instrument case to switch probes.

The ERK-525 is a complete, portable radiation monitoring system designed to measure a broad range of radioisotope contamination under field conditions. The system contains a state of the art, microprocessor based digital display meter that auto ranges and can detect most of the common alpha, beta & gamma radiation that is likely to be present in an emergency situation. The DSM-525 is a...

The original "Hot Dog" probe. This detector is an excellent application for specific gamma/beta detection. With a a rugged chrome plated brass housing and easy slide internal beta shield, the GP-1010 is the optimal detector for gamma and beta monitoring.

The bPAD is a microprocessor based Single Channel Analyzer (SCA) that incorporates a preamplifier, an amplifier, and a discriminator in a compact photomultiplier tube base. The bPAD also includes its own programmable high voltage power supply allowing for the operation of a broad range of standard 14-pin photomultiplier tubes used with scintillation type radiation detectors (e.g. PVC, NaI(Tl...

The NitroSPEC can be equipped with a wide range of HPGe detectors depending on the application. HPGe planar GPD detectors are available for analysis of Gamma and X-rays.HPGe coaxial GCD detectors are available with relative efficiencies up to 20%. Standard or with extended energy range (X series). In field mode the NitroSPEC is used as identifier simultaneously acquiring and saving data for...

The bMCA is a compact and fully digital Multichannel Analyzer (MCA) capable of performing Pulse Height Analysis (PHA) of a signal produced by a standard 14-pin PMT coupled to a scintillation detector such as NaI(Tl), LaBr3(Ce), LaCl3(Ce), CeBr3, etc. The bMCA can be easily interfaced to a typical PC or notebook via a standard USB port for further data transfer and analysis.