The BNC–Heinzinger Magnet Power Supplies combine a slim and cost-optimized design with high flexibility. Depending on the application, the perfect combination of current and voltage can be set by the user. Control, regulation, and current measurements can be maximized as well.
The MPS series are adapted for inductive loads and for applications where the regulation behavior is optimized accordingly. The units offer the ability to cascade the available basis components to ensure flexibility on the highest level.
Ethernet interface and watercooling are standard as well as 19” housing where the components including infrastructure are installed.
Overview
- For inductive loads
- Standard configuration or possibility of cascading
- Flexible combination of DC-output current/voltage
- Slim design
- Water cooling
- Ethernet interface
| Mains Input | Supply Voltage | 400/480V ±10 %, 50/60 Hz |
|---|---|---|
| Precision |
Current Accuracy Current Ripple Current Stability |
<10ppm <10ppm <10ppm/hour |
| Dynamic | di/dt | >300A/sec. (up to 100kA/sec) |
| Efficiency | >90% | |
| Operation | Local |
LCU - Local Control Unit Ethernet Interface |
| Cooling | Water-Cooling | also for deionized water |
| Customer IF | Magnet Readback | magnet errors, magnet water errors, etc. |
Downloadable resources such as datasheets, firmware, software, drivers and products manuals. Alternatively, you can browse resources directly by visiting our downloads page.
• Product Datasheets
• Product Firmware
• Product Software and Drivers
• Product Manuals
