The PVM-1001 adjustable pulsed voltage source can drive a 50 ohm resistive load from 0 V to 950 V in less than 10 ns (Rise Time). Pulse widths can range from 55 ns to 10 us with repetition rates to 1 MHz (bursts to 5 MHz). Typical applications include instrument calibration, component testing, beam steering, Time-of-flight mass spectrometry, and PMT and MCP gating. An external trigger source controls the output pulse width and frequency.
Two models are available: the PVM-1001-P produces positive voltage pulses and requires an external positive high voltage power supply. The PVM-1001-N produces negative pulses and requires a negative supply.
The front panel has an SMB connector for the trigger input and a connector for the AC-to-DC converter. The rear panel has MHV connectors for high voltage input and pulsed high voltage output.
Overview
| Features | Applications |
|---|---|
|
Typical applications are instrument calibration, componenet testing, beam steering and PMT and MCP gating. |
| Maximum Voltage Amplitude | 950V |
|---|---|
| Maximum Frequency (MHz) | ≤ 1 MHz (≤ 5 MHz Burst) |
| Rise/Fall Time | 9ns |
| Pulse Engine (Trigger) | External |
| Pulse Polarity | Negative (-) or Positive (+) |
| Remote Control | N/A |
| Form Factor | Module |
| Dimensions (in) | 14x14x9 |
| Weight (lbs) | 4.5 |
PVM-1001 Box Contents
| Qty | Part Number | Description |
|---|---|---|
| 1 | PVM-1001 | PVM-1001 Serialized Unit |
| 1 | Operating Manual | Operating Manual for PVM-1001 |
| 1 | AC/DC Plug | Plug AC Interchange All Countries |
| 1 | AC/DC Wall Mount | AC/DC Wall Mount Adapter 12V 12W |
Accessories available for the PVM-1001 module:
- PVA-1001 Input and Output Cables
Input and Output Cable Drawings
Front Panel Features
Support Power Input
Support power input using the 12 VDC adapter, which is provided with the module.
Trigger Input
Use the SMB connector with 50 Ω termination for the External trigger input.
Air Vents
Keep the vents clear for cooling.
Cooling Fans
There are cooling fans on the top of the module. Please keep the top of the module clear for cooling.
Rear Panel Features
Positive or Negative Input Connection
High voltage input using an MHV connector. Positive or Negative depends on which module was purchased. Do NOT plug the incorrect polarity into the module.
Output Connection
Pulsed voltage output using an MHV connector.
Downloadable resources such as datasheets, firmware, software, drivers and products manuals. Alternatively, you can browse resources directly by visiting our downloads page.
• Product Datasheets
• Product Firmware
• Product Software and Drivers
• Product Manuals