The PVX-4110 pulse generator is optimized for high impedance capacitive loads and is well suited for driving extraction grids and deflection plates for electrostatic modulation of particle beams in time-of-flight mass spectrometers and accelerators, optical devices like Pockels cells and Q-switches, as well as certain low-current plasma applications. It is a direct-coupled, air-cooled solid-state half-bridge (totem pole) design, and has over-current detection and shut-down circuitry.
All control and protection logic circuitry, support power, energy storage and output stage circuitry are incorporated into the PVX-4110, which can be connected directly to the load. The unit features front panel indicator LEDs to monitor the status of the pulse generator, with front panel voltage and current monitors to provide a straightforward means to view the output voltage and waveforms in real-time.
Overview
- 0 to ±10,000 V Pulse Output
- <60 ns Rise and Fall Times, 10 kHz Pulse Repetition Frequency
- Protected Against Arcs, Shorts and Load Transients
- Voltage and Current Monitor Outputs
| Max Voltage Amplitude |
10,000V |
| Pulse Polarity |
Bipolar (+/-) |
| Max/Min Frequency |
10 kHz |
|
Pulse Width |
<200ns to DC, Controlled by Input Gate |
| Rise/Fall Time |
60ns |
| Pulse Engine (Trigger) |
External |
| Remote Control |
N/A |
| Form Factor |
Benchtop Please contact about Optional Rackmount Kit |
| Dimensions (in) |
26 x 26 x 12 |
| Weight (lbs) |
35 |
| Shipping Dimensions |
28 x 23 x 13" |
| Shipping Weight |
40 lbs |
Downloadable resources such as datasheets, firmware, software, drivers and products manuals. Alternatively, you can browse resources directly by visiting our downloads page.