The GFT644 module is specially designed for interfacing signal and 50 Ω long cable.
The input threshold can be set to 1.5 or 0.0 or -1.5 V and the input load can be selected from 50 Ω to 1 KΩ pull up by a front panel switch. So that channel input can be driven directly by TTL / CMOS logic levels or open collector or negative pulse ( 0 to -2 V) or AC coupled signal ( +0.5 to -0.5 V)
All outputs with 50 Ω load can drive 100 feet of cable at clock rate greater than 200 MHz with 2.5 V amplitude. Each output polarity can be set normal or inverted and is compatible with DC or AC TTL input.
The GFT644 is a compact module supplied with a +5V AC/DC adapter
Typical GFT644 application includes to distribute four independent High speed signals to four devices via long cable (up to 100 feet) with TTL level.
Overview
- Up to 200 MHz clock rate
- Drive 100 feet of cable at 200 MHz
- Four independent inputs with:
- Selectable threshold (+1 or 0 or -1 V)
- Selectable internal load ( 50 Ω or 1 kΩ pull up)
- Four 50 Ω TTL outputs with:
- Selectable polarity (Normal or Inverted)
- 1 ns typical output rise & fall time
- 10 ps input to output RMS jitter
- Operate from DC +5 V
- Compact module: 115 x 80 x 30 mm
- High speed digital communication
- High to low Impedance converter
- Pulse inverter
- Level translator
- Sine to square wave converter
- Long line Drivers
- Tools for lab
- Components Test equipment
Specifications
|
Input |
||
|
Number |
4 |
|
|
Range |
+5 V to -5 V (max.) |
|
|
Threshold level |
Preset to -1 V or 0 V or +1 V |
|
|
Internal load |
Adjustable to 50 Ω or 1 kΩ pulled up to +5 V |
|
|
Minimum pulse width |
5 ns |
|
|
Output |
||
|
Number |
4 |
|
|
Output resistance |
50 Ω |
|
|
Low level |
0.5 V |
|
|
High level |
2.5 V @ Load=50 Ω, 4 V @ Load > 10 kΩ |
|
|
Rise /fall times |
1 ns / 1ns @ 100 MHz square wave |
|
|
Polarity from input |
Normal or Inverted |
|
|
Jitter RMS |
10 ps (Input to output) |
|
|
Max clock frequency |
200 MHz @ cable length = 3 feet |
|
|
200 MHz @ cable length = 100 feet |
||
|
Skew |
500 ps (TBC) |
|
|
General specifications |
||
|
Control |
Switches to select:
Power on Indicator |
|
|
Inputs & outputs |
All are BNC connectors |
|
|
Size |
W=115, L=80, H=30 mm |
|
|
Power V/A |
+5 V / 200 mA max. External AC (90 -240 V) to DC (+ 5 V) adapter furnished |
|
|
Power connector |
Jack 2.10 mm |
|
|
Option : |
||
|
GFT614 module |
1 input to 4 Line 50 Ω Driver Module |
|
Downloadable resources such as datasheets, firmware, software, drivers and products manuals. Alternatively, you can browse resources directly by visiting our downloads page.
• Product Datasheets
• Product Firmware
• Product Software and Drivers
• Product Manuals