Model 7000 Series | 1 MHz to 65 GHz Phase Noise Tester - Signal Source Analyzer

The 7000 series is an all-in-one integrated solution that offers an indispensable set of low-noise phase measurement functions.  The instrument comprises a two-channel, cross-correlation system with two internal, tunable references sources that also allows measurements with externally sourced references. We offer three platform options for the 7000 Series Phase Noise Testers: the 7070 1 MHz to 7 GHz, the 7300 1 MHz to 26 GHz, 7340 1 MHz to 40 GHz, 7350 1 MHz to 50 GHz, and the 7360 1 MHz to 65 GHz. 

BNC 7000 Series SIGNAL SOURCE ANALYZER CONFIGURATOR

Frequency Range: 1 MHz to 7 GHz
1 MHz to 26.5 GHz
1 MHz to 40 GHz
1 MHz to 50 GHz
1 MHz to 65 GHz
Options: [-AM] Amplitude Noise Measurement
[-LN] Ultra-low Noise Internal Reference for Improved Close-in-Phase Noise
[-PULSE] Pulse RF Phase Noise Measurement
[-NPS] Narrow Pulse (Low Duty Cycle) Phase Noise Measurement
[-TRAN] Transient Analysis
[-BURST] Burst Mode Phase Noise Measurement
[-APN] Additive / Residual Phase Noise Measurement
[-LO] Local Oscillator (Access to Internal References for APN)
[-TSTAB] Time Stability Analysis
[-VCO] VCO Characterization
[-SPEC] Spectrum Monitoring
[-GPIB] GPIB Communication Port
[-RM] Rackmountable Chassis (* No Handle and Protective Bezel)
Model 7340
1 MHz - 40GHz Signal Source Analyzer

Overview

Overview 

Applications

Features

  • High-speed production testing of phase noise
  • VCO Testing and Characterization
  • Additive Phase Noise characterization of amplifiers, transmitters, mixers 
  • Ultra-low Phase Noise oscillator analysis
  • DRO's, SAW, YIG, VCO, PLL, Synthesizers, etc. 
  • Time Stability analysis of clocks
  • All-in-one compact very fast measurement system
  • Measurements down to -190 dBc/Hz
  • Wide offset range from 0.01 Hz to 100 MHz
  • Highest flexibility & dynamic range by selectable internal or external references
  • Two extremely flexible integrated programmable low noise power supplies and VCO tuning voltages.
  • Powerful GUI and programming interface
  • External battery pack option

Quick Specs
Frequency Range

7070: 1 MHz to 7 GHz
7300: 1 MHz to 26 GHz
7340: 1 MHz to 40 GHz

7350: 1 MHz to 50 GHz

7360: 1 MHz to 65 GHz

Input Power Range  -10 to +20 dBm
Analysis Range (Offset)  0.01 Hz to 100 MHz
Dimensions (W x L x H)
Weight
18.4 x 13.5 x 6.1 in   [467.5 x 342 x 154 mm]
22lbs [10 kg]
Measurements Supported CW and Pulse Absolute Phase Noise (Standard, Ultra-Low Noise, High-Drift mode)
CW and Pulse Additive Phase Noise,
CW and Pulse Amplitude Noise,
FFT (Fast Fourier Transform) and Transient Analyzer,
Time Stabiltily and Spectrum Analysis,
Frequency Counter,  Allan Deviation, Jitter, Power and Phase,
VCO Characterization Test Bench and Baseband Measurements.
Options

OPTION CODE MODE DESCRIPTION
GUI ATE
AM Y Y AM Noise Measurement and Analysis
LN Y Y Ultra-Low Noise Internal OSC (improves Close-in or low offsets measurement floor)
PULSE Y N Pulse Measurement Mode (Absolute and Additive Phase Noise)
NPS Y N Narrow Pulse and Low Duty Cycle Measurement Mode (Absolute Phase Noise) *NEW
BURST Y N Burst Mode Phase Noise Measurement (great for measuring very low duty RF pulse)
APN Y N Additive (residual) Phase Noise Measurement and Analysis
LO Y N Access to two Internal References
GPIB Y Y GPIB interface port
TRAN Y N Transient Measurement 
TSTAB Y N Time Stability Measurement and Analysis 
VCO Y Y Voltage Controlled Oscillator (VCO) Characterization Bench 
SPEC Y N* Spectral Monitoring
RM n/a n/a Rackmountable Chassis (* No carrying Handle and no protective rubber bezel)

Accessories
Model or Part Number Description
P/N 7141 Traceable AM / PM Noise Standard
PS06 1GHz to 6GHz Mechanical Phase Shifter
PS18 4GHz to 18GHz Mechanical Phase Shifter
P/N 7128 Pre-configured Windows-based Laptop with BNC Model 7000 Series GUI
P/N 7135 Spare Power Supply
Signal Source Analyzer Resources

A remote control for the instrument is available with LAN (VXI-11), USB or GPIB. The GPIB is an option and conforms with IEEE standards. The remote control is addressed with a user choice of software or command string options. The included comprehensive GUI gives users control of all parameters in BNC's familiar virtual instrument panel.

Click Image to Enlarge

Frequently Asked Questions (FAQ) 

What Is Phase Noise?

What Is Phase Noise?

Phase noise is the noise produced by fast, short term fluctuations in a signal. Phase noise diminishes the signal quality and increases error rates in communication links. Although there is no such thing as "no" phase noise, the less you have, the better.

Downloadable Resources 

Downloadable resources such as datasheets, firmware, software, drivers and products manuals. Alternatively, you can browse resources directly by visiting our downloads page.

Product Datasheets
• Product Firmware
• Product Software and Drivers
• Product Manuals

Media

Media 
Video URL 
Video title 
A Tutorial on VCO Characterization - Signal Source Analyzers (SSA)
Video URL 
Video title 
Signal Source Analyzers - Transient Analyzer Tutorial Video
Video URL 
Video title 
Signal Source Analyzers - External References Tutorial Video
Video URL 
Video title 
Measure Absolute Phase Noise of a Pulsed Signal
Video URL 
Video title 
Disruptive Phase Noise Measurement Technology – The Next Evolution of...
Video URL 
Video title 
New Pulse Phase Noise and Burst Phase Noise Measured at IMS
Video URL 
Video title 
What is a Phase Noise
Video URL 
Video title 
Webinar on RF Instrumentation for ATE, Antenna Measurements, Q-Bit and more
Video URL 
Video title 
Making RF/Microwave Pulse Phase Noise Measurements down to 1% Duty
Video URL 
Video title 
BNC | PNT Customer Spotlight: Valon Technology
Video URL 
Video title 
Phase Noise | Stuart Rumley & Valon Technology

Price List

Price lists are available to our registered users. To view pricing for this and other products, please log in or create a free account.