Fast Pulses with Delay and Width Control
The Model 201E is a plug-in module for BNC Model 6040 Mainframe. It offers 150pS risetimes and very low jitter. The sharp edges of the 201E are ideal for testing components or triggering experiments. The pulse amplitude and width are adjustable via the front panel or remote programming.
The 201E may be triggered with an internal rate generator, external trigger, or external modulation. There is an ECL output, a Pulse Out from the 6040, and a Fast Pulse Out from the 201E module (SMA connector).
Overview
- 150ps Rise and Fall Times
- Trigger Internal 0.01 Hz to 100 MHz; external 0 to 100 MHz
- Pulse Width 3 ns to 640 s
- Impulse 400 ps typical (fixed)
- Delay 0 ns to 640 s (plus fixed delay)
- Adjustable Pulse Amplitude and Baseline
- Photo Multiplier
- Photo Detector
- Fiber Optics Testing
PULSE OUT and TIMING
| Trigger | Internal 0.01 Hz to 100 MHz; external 0 to 100 MHz. |
| Pulse Width | 3 ns to 640 s. 1 ns available through internal adjustment or with External Drive (contact factory). |
| Delay | 0 ns to 640 s |
| External Drive | 0 to 300 MHz, 300 mV min. amplitude; 50 Ω input. Typical performance with inputs of 1 V or more provides pulse widths down to 1 ns or less at drive frequencies to 500 MHz. |
| Module Delay | 0 ns typical (fixed) mainframe's Pulse Out to module's Pulse Out. Jitter 30 ps rms. |
| Amplitude Level | -5V to +5V |
| Baseline Level | -5V to +5V |
Downloadable resources such as datasheets, firmware, software, drivers and products manuals. Alternatively, you can browse resources directly by visiting our downloads page.
• Product Datasheets
• Product Firmware
• Product Software and Drivers
• Product Manuals
Price List
Price lists are available to our registered users. To view pricing for this and other products, please log in or create a free account.