Model 507 —
High Current Pulse Generator
The Model 507 High Current Pulse Generator is an ideal fire set for airbag squib, detonator and pyrotechnics initiator testing.
The instrument provides adjustable current signals up to 25 amps. The unit comes with 2 or 4 digitally controlled load resistant independent outputs.
Output pulse widths and delays are unique to each channel and can be precisely controlled from 0.1 to 100 msec in 200 ns steps.
The Current Pulse Generator also provides a TTL Sync output to T0 – particularly useful as a reference source/trigger for cameras or other equipment.
Applications such as air bag deployment testing (squib detonation), igniter triggering or ballistics work can be done reliably, safely and with a high level of repeatability.
|CHANNELS||Two (2) independent outputs, with digitally controlled delay and pulsewitdh|
|CURRENT||0 to 24A (Bank voltage 44V minimum)|
|DELAY||0 to 99.9999998s|
|PULSEWIDTH||10µs to 100ms|
|ACCURACY||100ns + .0001x delay|
|TIMEBASE||5MHz, 25PPM crystal oscillator|
|TRIG DELAY||Ext Trig to < 10µs|
|RATE||Dc to 1/ (75ms + largest delay + period)|
|THRESHOLD||3VDc (3mA into optoisolator)|
INTERNAL RATE GENERATOR
|MODES||Single shot, external trugger|
|SLEWRATE||> 2.5A/ µs|
|OVERSHOOT||< 100mA + 10% of pulse amplitude|
|AMPLITUDE||0-25A (loads 1 - 10 ohm)|
|PEAK CURRENT||25A per channel|
|DC CURRENT LIMIT||150mA (each channel)|
|RS232||9600 Baud. All instrument functions and settings may be controlled ovr the interface bus.|
|STORAGE||Twelve(12) complete configurations may be stored and recalled for the front panel or the computer interface|
|POWER||< 100 W @ 120 or 220 VAC|
Download and access all GUIs, Firmware, Drivers and other supporting material.